Web camera cover

Web camera cover

Camera, Favourite projects, Laptop

3D model of a camera clip

Are you afraid that someone can watch you from your camera? Instead of using tape all the time, you can print this clip to protect your privacy. A minimalism way to cover your web camera of your laptop, desktop pc or your tablet. Using a thin double sided tape, the clip can be removed at any time and also does not prevent laptops from closing. Just download the model and save money from buying a similar product…

Free 3D model of a web camera cover
3D printed web camera cover

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of one perimeter line.

Layer Height

Low, e.g. for 0.4 mm nozzle, it is recommended the use 0.1 mm layer height.

Printing speed

Low.

Travel speed

Low.

DOWNLOAD DESIGN: LINK
(1X) PLA FILAMENT
(1X) THIN DOUBLE SIDED TAPE


RECENT POSTS
Universal laptop cooler with stand

Universal laptop cooler with stand

Electronics, Favourite projects, Gadgets, Laptop

3D model of universal laptop cooler with stand for 3D printing

Instead of buying cheap or expensive laptop coolers that you are not sure if they match with your laptop, you can 3D print and build our propose gadget of a universal cooling pad extracting the hot air from your laptop. The mini vacuum made by three fans of 25X25X10mm size extracting the hot air directly from your laptops’ GPU and CPU. Also, the stand is made at an angle of 15 degrees reducing the temperature by just letting the hot air under your laptop to be recycled. Despite the ergonomic stand, the proposed cooler is much smaller than the common commercial vacuum USB coolers and more effective.

Free 3D model of a universal laptop cooler with stand
3D printed universal laptop cooler with stand

The assembly of the laptop cooler is very easy. Just 3D print the models that you can find at the end of the post with the suggested printing settings. Also, if you deal any trouble with the cup of the fans, a scaled part at 99% is included. Use of 2.5mm or 3mm bolts with 15mm length. In the above photo, 2.5mm bolts have been used. Find a USB cable, even an old one, cut it at the right size and find the red and black cables. Make a simple connection of all the red cables and all the black cables respectively and you are ready. Don’t forget to make a knob or just use a plastic strap to secure the cable not to go off. The only disadvantage of this proposed 3D printed product is that it makes noise due to the low-cost fans. However, it can be used in conjunction with our proposed design product laptop stand. Don’t let your laptop burning when it handles heavy computational lifts!

Free 3D model of a universal laptop cooler with stand
The connection of the universal laptop cooler.

FOR aLL PARTS

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

High.

Printing speed

High.

Travel speed

High.

DOWNLOAD DESIGN: LINK
(1X) PLA FILAMENT
(1X) SIMPLE USB CABLE
(3X) 25x25x10 mm Fan 5V
(12X) BOLTS 3MMX15MM or 2.5MMX15MM
(12X) NUTS 3MM (OPTIONAL)


RECENT POSTS
Baby shoes

Baby shoes

Favourite projects, Other wearables, Wearable/Fashion

3D model of a pair of baby shoes

Print your baby’s first pair of shoes by using a flexible filament! The models have been designed to be as small as possible and printable, so just scale them up at the right size.

Free 3D models
3D printed pair of a baby shoes

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

Low, e.g. for 0.4 mm nozzle, it is recommended to use 0.1 mm.

Printing speed

Low.

Travel speed

Low.

DOWNLOAD DESIGN: LINK
(1X) PLA FILAMENT
(1x) FLEXIBLE FILAMENT


RECENT POSTS
Smartphone gaming grip with screen magnifier

Smartphone gaming grip with screen magnifier

Favourite projects, Gadgets, Popular posts, Smartphone

3D model of a universal gaming controller for smartphones with screen magnifier

This is the updated version of our smartphone gaming controller with a screen magnifier for the best gaming experience. Download for free an adjustable gaming grip for smartphones or light consoles with nice fitting and ergonomic design as it was the previous model but now live the gaming experience magnified. This game controller was printed with a carbon filament and can be adjusted in various smartphones; up to 5-6 inches smartphone. The previous version can fit larger smartphone downloading and printing the ‘long holder’ and using longer springs. If you have printed the previous version, the only thing that you need to print is the left and right part 3.

Free 3D model of gaming pad with screen magnifier
Rendered view of a gaming pad 3D model with screen magnifier holder

 

Free 3D model of gaming pad with screen magnifier
Front view of the 3D printed gaming pad with screen magnifier

Use of a spring or even a simple rubber.

Back view of the 3D printed gaming pad


Handle Left/Right Part 1

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

Medium. Lower layer height makes smoother surfaces.

Printing speed

High printing speed with low printing for the last layers.

Travel speed

High.

Handle Left/Right Part 2

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

Medium. Lower layer height makes smoother surfaces.

Printing speed

High.

Travel speed

High.

 


Handle Left/Right Part 3

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

Medium. Lower layer height makes smoother surfaces.

Printing speed

High.

Travel speed

High.

Holder

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

High.

Printing speed

Medium printing speed. At the last layers probably there is a need for lower speed because the part can be detached from the vibrations.

Travel speed

Medium travel speed, because the extruder nozzle can unstack the part.

DOWNLOAD DESIGN: LINK
COMPONENTS:
(1X) MAGNIFIER SHEET 180X120 (MM)
(7X) BOLTS 3MMX10MM
(1X) NUTS 3MM
(2X) SPRINGS OR SIMPLE RUBBERS
(1X) CARBON FILAMENT


RECENT POSTS
Cookies cutter – My Neighbor Totoro

Cookies cutter – My Neighbor Totoro

Cookies cutter, Favourite projects, Home/Office

3D model of a unique cookie cutter for 3D printing

The design if from ‘My Neighbor Totoro’ and can be printed with PLA filament, which has been recognized as safe if it will be used in contact with food.

Free 3D model of a cookie cutter from 'My Neighbor Totoro'
3D model of a cookie cutter from ‘My Neighbor Totoro’

There are two models, one regular and one large. You can download them at the end of the post.

 Free 3D model of a cookie cutter from 'My Neighbor Totoro'
3D model of a cookie cutter from ‘My Neighbor Totoro’

 

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

Medium layer height, i.e. 0.15 mm for a 3D printer with 0.4 mm nozzle, this will help the small probes to be printed.

Printing speed

Low to medium printing speed, it needs enough time to print the details.

Travel speed

Low to medium printing speed, there is a change the high speed to ruin the part.

Download Design: Link
(1x) PLA filament


RECENT POSTS
Cookies cutter – Pickle Rick

Cookies cutter – Pickle Rick

Cookies cutter, Favourite projects, Home/Office

3D model of a unique cookie cutter for 3D printing

The design represents Rick Sanchez as a pickle and can be printed with PLA filament, which has been recognized as safe if it will be used in contact with food.

Free 3D model of a cookie cutter with Pickle Rick
3D model of a cookie cutter with Pickle Rick

There are two models, one regular and one large. You can download them at the end of the post.

Free 3D model of a cookie cutter with Pickle Rick
3D model of a cookie cutter with Pickle Rick

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

Medium layer height, i.e. 0.15 mm for a 3D printer with 0.4 mm nozzle, this will help the small probes to be printed.

Printing speed

Low to medium printing speed, it needs enough time to print the details.

Travel speed

Low to medium printing speed, there is a change the high speed to ruin the part.

Download Design: Link
(1x) PLA filament


RECENT POSTS
Hot chocolate / Coffee stencil – Banksy’s hearts

Hot chocolate / Coffee stencil – Banksy’s hearts

Chocolate/Coffee stencils, Favourite projects, Home/Office

3D model of a unique hot chocolate – coffee stencil for 3D printing

The design is based on the Banksy’s hearts and the stencil can be printed with PLA filament, which has been recognized as safe if it has been used in contact with food. The diameter of the coffee stencil is 8 cm. Make a cool custom design with chocolate powder on your cappuccino or chocolate by using our unique stencils. Surprise your customers, your family or your kids by making special hot drinks with your personal taste. There is no need for buying these, just download the model and print it on your own 3D printer.

Free coffee stencil 3D model
3D model of a hot chocolate/coffee stencil for 3D printing with Banksy’s hearts

You can download the same model with a ring holder.

 

free coffee stencil 3D model
3D model of a hot chocolate/coffee stencil for 3D printing with Banksy’s hearts

The coffee stencils can be used also on lattes, biscuits, pastries, cakes, desserts, cocktails and it would be a pleasant gift for everybody. You can find a variety of unique stencils here representing icons for every mood and popular figures such as Stormtrooper, Death Star, minions, unicorn and much more.

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

High layer height, i.e. 0.25 mm for a 3D printer with 0.4 mm nozzle, since it does not affect any detail of the part.

Printing speed

Medium printing speed for perimeter lines and high speed for infill.

Travel speed

High.

DOWNLOAD DESIGN: LINK
DOWNLOAD DESIGN WITHOUT RING HOLDER: LINK
(1X) PLA FILAMENT


RECENT POSTS
Pen and plant holder

Pen and plant holder

Desk, Favourite projects, Gardening, Home/Office

3D model of a fused pen holder with a plant pot

We thought that it would be nice for someone to be able to have a plant at his office but also to be useful for him. This holder design has been printed with wood filament and has six places for pens or pencils and at the middle of the model there is a place for plants.

Free 3D model of a fused flower pot and pen holder
3D printed pen holder with place for plant

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of two or three perimeter line.

Layer Height

Medium layer height. The rhombus will be printed better with a lower layer height.

Printing speed

High.

Travel speed

Low travel speed. Otherwise, the rhombus can break from the extruder nozzle.

Download Design: Link
(1x) Wood filament


RECENT POSTS

 

Cute flower pot

Cute flower pot

Desk, Favourite projects, Gardening, Home/Office

3D model of a pot for 3D printing

A simple cute flower pot for the home printed with carbon filament and white PLA.

Free 3D model of cute flower pot for 3D printing
3D printed cute flower pot

Supports or rafts

This part does not need supports or rafts. The last layers of the object have been designed as a bridge and not as a dome. Also, the bridge is inside and therefore there is no point to waste material.

Perimeters

Three lines perimeter.

Layer Height

Low layer height, i.e. 0.1 mm. It affects mostly the last layers, which is the bottom of the model. A higher layer can be used, but it will not make a nice bottom surface (or top during 3D printing). However, because the object is placed upside down, you will not be able to notice this detail.

Printing speed

High printing speed, with low to medium gap speed. However, the high speed can create perpendicular stripes on the object due to the vibrations.

Travel speed

High.

Download Design: Link
(1x) Carbon filament
(1x) PLA filament


RECENT POSTS

 

Star Wars Poker Chips

Star Wars Poker Chips

Board games - Toys, Favourite projects

3D models of poker chips for 3D printing

A series of different Star Wars Poker Chips representing: Rebellion, Millenium Falcon, Stormtrooper, Kylo Ren, Boba Fett, Yoda, Darth Vader and Death Star. The poker chips have the standard dimensions with 39mm diameter and 3.3mm height. Use only one perimeter line during 3D printing.

Free 3D models of Star Wars Poker Chips for 3D printing
3D printed Star Wars Poker Chips

Supports or rafts

This part does not need supports or rafts. However, if you have issues with bridges because of your slicer software try to use supports.

Perimeters

Use of one perimeter line. When the designs are complicated, the use of one perimeter line is recommended because more than one could leave holes in the part.

Layer Height

Medium layer height, i.e. 0.15 – 0.2 mm for a 3D printer with 0.4 mm nozzle. However, if you use supports it’s better to use low layer height.

Printing speed

Medium with very low bridge speed. Issues with the bridges could appear depending on the slicer software.

Travel speed

High.

Download Design: Link
(1x) PLA filament

(1x) PLA bronze


RECENT POSTS