Earphones holder

Earphones holder

Gadgets, Other wearables, Smartphone, Wearable/Fashion

3D model of an earphones holder for 3D printing

Make a smart earphones holder by 3D printing our proposed model. Print the clips and use a piece of a flexible filament to hold your earbuds around your neck all the time.

Free 3D model of an earphones holder
3D printed earphones holder

Cut a piece of a flexible filament at the right size, pass it through the hole and make a knob. You can also burn it a little bit with a lighter.

Free 3D model of an earphones holder
Use a piece of a flexible filament for the earphones holder

Free 3D model of an earphones holder
3D printed earphones holder

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of one perimeter line.

Layer Height

Low.

Printing speed

Low.

Travel speed

High.

DOWNLOAD DESIGN: LINK
(1X) PLA FILAMENT
(1X) FLEXIBLE FILAMENT


RECENT POSTS
Baby shoes

Baby shoes

Favourite projects, Other wearables, Wearable/Fashion

3D model of a pair of baby shoes

Print your baby’s first pair of shoes by using a flexible filament! The models have been designed to be as small as possible and printable, so just scale them up at the right size.

Free 3D models
3D printed pair of a baby shoes

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

Low, e.g. for 0.4 mm nozzle, it is recommended to use 0.1 mm.

Printing speed

Low.

Travel speed

Low.

DOWNLOAD DESIGN: LINK
(1X) PLA FILAMENT
(1x) FLEXIBLE FILAMENT


RECENT POSTS
E-cigarette case and air ring

E-cigarette case and air ring

Gadgets, Other wearables, Wearable/Fashion

3D models of an e-cigarette case and an air ring for 3D printing

This type of e-cigarettes can fall down and break very easily. Therefore, we designed this 3D printed e-cigarette case with a place for a small 10ml e-smoking liquid bottle. You can find the design with different diameters between 25mm to 20mm. Also, there is two e-cigarette case type: small and large which have been 3D printed with a carbon filament.

Free 3D model of an e-cigarette case for 3D printing
3D printed e-cigarette case with a place for a small 10ml e-smoking liquid bottle and a 3D printed air ring

For the case

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

Hight layer height for less printing time.

Printing speed

High printing speed, but low speed only for the last layers. Tthe clip which is at the higher point of the object should be printed rigid.

Travel speed

High.

For the air ring

Supports or rafts

If you use very low bridge speed, there is no need for supports or rafts (this is how we printed). However, the use of supports could be a better solution.

Perimeters

Use of three lines perimeter.

Layer Height

Hight layer height for less printing time.

Printing speed

High printing speed with very low bridge speed. It is very important to keep this speed extremely low, so to create the gap for the air accurately. However, if supports will be used there is no need for low bridge speed.

Travel speed

High.

Download Design: Link
(1x) PLA filament
(1x) Carbon filament


RECENT POSTS

 

Earplugs

Earplugs

Gadgets, Other wearables, Wearable/Fashion

3D printed earplugs

Most of the simple earplugs cannot be attached to the ear for a long time. In the proposed design, the holders keep the earplugs attached to the ears, so they can be used also during sleeping or in other daily activities. Also, a valve can be used for the reduction of the pressure; it can be open or closed. Flexible materials are recommended for the main parts and PLA for the valves.

Free 3D models of earplugs for 3D printing
Available three types of 3D printed earplugs
Free 3D models of earplugs for 3D printing
Cut view of the earplug showing the valve
The valve and how it lets the air out

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

Low.

Printing speed

Low.

Travel speed

Low.

Download Design: Link

(1x) PLA filament

(1x) Flexible filament


RECENT POSTS