Necklace – Skeleton

Necklace – Skeleton

Necklaces, Wearable/Fashion

3D model of a necklace representing a skeleton

We tried to keep the necklace small but if you will find some issues with the 3D printing, just remember that you can scale it up a little bit. For the assembly of the skeleton, you can use thread or small rings. We used thread and we don’t believe that they will hold for long. Of course, more free designs and models for 3D printing are available on our site.

A free 3D model for fabrication in a 3D printer
3D printed necklace of a skeleton

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of one perimeter line. When the designs are complicated, the use of one perimeter line is recommended because more than one could leave holes on the part.

Layer Height

High layer height, i.e. 0.25 mm for a 3D printer with 0.4 mm nozzle, since it does not affect any detail of the part.

Printing speed

Medium printing speed, but low printing gap speed.

Travel speed

Medium travel speed but try to avoid oozing effect and select the right printing temperature because the parts of this model are very close to each other.

DOWNLOAD DESIGN (0.96$): Link
(1x) PLA filament


RECENT POSTS

 

Necklace – Cat

Necklace – Cat

Necklaces, Wearable/Fashion

3D model of a necklace with a cat

If you will find some issues with the 3D printing or it is too small for your taste, just remember that you can scale it up a little bit. The object was printed with carbon filament. If you are interested in more, check here.

A free 3D model for fabrication in a 3D printer
3D printed necklace with a cat

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

High layer height, i.e. 0.25 mm for a 3D printer with 0.4 mm nozzle, since it does not affect any detail of the part.

Printing speed

Medium.

Travel speed

Medium.

Download Design: Link
(1x) PLA filament
(1x) Carbon filament


RECENT POSTS
Necklace – Deltas with middle lines

Necklace – Deltas with middle lines

Necklaces, Wearable/Fashion
3D model of a necklace representing three deltas with middle lines

The necklace was 3D printed with carbon filament. You can find similar designs here. We hope you like it!

Free 3D model for fabrication in a 3D printer
3D printed necklace of three deltas with middle lines

A minimal design symbolizing the letter Delta with lines.

Free 3D model for fabrication in a 3D printer
3D printed necklace of three deltas with middle lines

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter, because the model has straight lines it would be better to use more than one line as a perimeter.

Layer Height

High layer height, i.e. 0.25 mm for a 3D printer with 0.4 mm nozzle, since it does not affect any detail of the part.

Printing speed

Medium.

Travel speed

Medium.

Download Design (0.96$): Link
(1x) PLA filament
(1x) Carbon filament


RECENT POSTS
Necklace – Double deltas

Necklace – Double deltas

Necklaces, Wearable/Fashion

3D model of a necklace representing three double deltas

The necklace was 3D printed with carbon filament. You can find similar designs here. We hope you like it!

Free 3D model for fabrication in a 3D printer
3D printed necklace of three double deltas

A minimal design symbolizing a double letter Delta.

Free 3D model for fabrication in a 3D printer
3D printed necklace of three double deltas

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter, because the model has straight lines it would be better to use more than one line as a perimeter.

Layer Height

High layer height, i.e. 0.25 mm for a 3D printer with 0.4 mm nozzle, since it does not affect any detail of the part.

Printing speed

Medium.

Travel speed

Medium.

Download Design (0.96$): Link
(1x) PLA filament
(1x) Carbon filament


RECENT POSTS
Necklace – Spiral

Necklace – Spiral

Necklaces, Wearable/Fashion

3D model of a necklace with a spiral

The design was inspired by a Mayans’ symbol. You can find more 3D printed necklaces here!

A free 3D model for fabrication in a 3D printer
3D printed necklace of a spiral

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of one perimeter line. When the designs are complicated, the use of one perimeter line is recommended because more than one could leave holes on the part.

Layer Height

High layer height, i.e. 0.25 mm for a 3D printer with 0.4 mm nozzle, since it does not affect any detail of the part.

Printing speed

Medium printing speed, but low printing gap speed.

Travel speed

Medium.

Download Design (0.96$): Link
(1x) PLA filament


RECENT POSTS

 

Necklace – Black hole

Necklace – Black hole

Necklaces, Wearable/Fashion

3D printed necklace representing a black hole

The necklace was 3D printed with carbon filament. You can find similar designs here. We hope you like it!

Free 3D model for fabrication in a 3D printer
3D printed necklace with a black hole

 

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of one perimeter line. When the designs are complicated, the use of one perimeter line is recommended because more than one could leave holes in the part.

Layer Height

High layer height, i.e. 0.25 mm for a 3D printer with 0.4 mm nozzle, since it does not affect any detail of the part.

Printing speed

Medium printing speed, but low printing gap speed.

Travel speed

Medium.

Download Design (0.96$): Link
(1x) Carbon filament
(1x) PLA filament


RECENT POSTS
Necklace – Cat

Necklace – Cat

Exclusively, Necklaces, Wearable/Fashion

3D printed necklace with a cat

If you are interested in more designs, you can check here.

Free 3D model of a cat necklace for fabrication in a 3D printer
3D printed necklace with a cat

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of one perimeter line. When the designs are complicated, the use of one perimeter line is recommended because more than one could leave holes on the part.

Layer Height

High layer height, i.e. 0.25 mm for a 3D printer with 0.4 mm nozzle, since it does not affect any detail of the part.

Printing speed

Medium printing speed, but low printing gap speed.

Travel speed

Medium.

Download Design: Link
(1x) PLA filament


RECENT POSTS

 

Necklace – Dog

Necklace – Dog

Exclusively, Necklaces, Wearable/Fashion

3D printed necklace with a dog

If you are interested in more designs, you can check here.

Free 3D model of a dog necklace for fabrication in a 3D printer
3D printed necklace with a dog

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of one perimeter line. When the designs are complicated, the use of one perimeter line is recommended because more than one could leave holes on the part.

Layer Height

High layer height, i.e. 0.25 mm for a 3D printer with 0.4 mm nozzle, since it does not affect any detail of the part.

Printing speed

Medium printing speed, but low printing gap speed.

Travel speed

Medium.

Download Design: Link
(1x) PLA filament


RECENT POSTS

 

Necklace – Cat

Necklace – Cat

Exclusively, Necklaces, Wearable/Fashion

3D printed necklace with a cat

If you are interested in more designs, you can check here.

Free 3D model for 3D printing of a necklace with a cat
3D printed necklace with a cat

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of one perimeter line. When the designs are complicated, the use of one perimeter line is recommended because more than one could leave holes on the part.

Layer Height

High layer height, i.e. 0.25 mm for a 3D printer with 0.4 mm nozzle, since it does not affect any detail of the part.

Printing speed

Medium printing speed, but low printing gap speed.

Travel speed

Medium.

Download Design: Link
(1x) PLA filament


RECENT POSTS