Laptop stand

Laptop stand

Desk, Gadgets, Home/Office, Laptop

3D model of a laptop stand for 3D printing

A 3D model of a laptop stand with 15 degrees angle. A simple and a elegant design that helps for the reduction of your laptop’s temperature with an ergonomic style.  It has been printed with carbon filament. Each part needs one hour to be printed approximately with no supports and any special print setting. The best thing is that can be combined with our universal laptop cooler!

Free 3D model of a laptop stand for 3D printing
3D model of a laptop stand for 3D printing
Free 3D model of a laptop stand for 3D printing
3D model of a laptop stand for 3D printing

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

High.

Printing speed

High.

Travel speed

High.

DOWNLOAD DESIGN: LINK
(1X) CARBON FILAMENT OR (1X) PLA FILAMENT


RECENT POSTS
Pen and plant holder

Pen and plant holder

Desk, Favourite projects, Gardening, Home/Office

3D model of a fused pen holder with a plant pot

We thought that it would be nice for someone to be able to have a plant at his office but also to be useful for him. This holder design has been printed with wood filament and has six places for pens or pencils and at the middle of the model there is a place for plants.

Free 3D model of a fused flower pot and pen holder
3D printed pen holder with place for plant

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of two or three perimeter line.

Layer Height

Medium layer height. The rhombus will be printed better with a lower layer height.

Printing speed

High.

Travel speed

Low travel speed. Otherwise, the rhombus can break from the extruder nozzle.

Download Design: Link
(1x) Wood filament


RECENT POSTS

 

Cute flower pot

Cute flower pot

Desk, Favourite projects, Gardening, Home/Office

3D model of a pot for 3D printing

A simple cute flower pot for the home printed with carbon filament and white PLA.

Free 3D model of cute flower pot for 3D printing
3D printed cute flower pot

Supports or rafts

This part does not need supports or rafts. The last layers of the object have been designed as a bridge and not as a dome. Also, the bridge is inside and therefore there is no point to waste material.

Perimeters

Three lines perimeter.

Layer Height

Low layer height, i.e. 0.1 mm. It affects mostly the last layers, which is the bottom of the model. A higher layer can be used, but it will not make a nice bottom surface (or top during 3D printing). However, because the object is placed upside down, you will not be able to notice this detail.

Printing speed

High printing speed, with low to medium gap speed. However, the high speed can create perpendicular stripes on the object due to the vibrations.

Travel speed

High.

Download Design: Link
(1x) Carbon filament
(1x) PLA filament


RECENT POSTS

 

Multigonal pen holder

Multigonal pen holder

Desk, Home/Office

3D model of a pen holder

A multigonal pen holder for the office 3D printed with PLA filament.

Free 3D model of a pen holder for 3D printing
3D printed pen holder

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

High.

Printing speed

High.

Travel speed

High.

Download Design: Link
(1x) PLA filament


RECENT POSTS

 

Pencil holder – A man with a shield

Pencil holder – A man with a shield

Desk, Favourite projects, Home/Office, Popular posts

3D model of a pen holder shaped as a man with a shield

This pencil holder represents a not so brave warrior with a shield and pencils as arrows. It was printed using a wood filament, which contains 40% percent wood and 60% PLA. The extruder’s temperature should be at 180 degrees and the finish of the object looks like is made of wood. During the printing with the wood filament, the 3D printer needs low speed, especially for more complicated models because of the lack the filament’s strength.

Free 3D model of a pen holder for 3D printing
3D printed pencil holder shaped as a man with a shield and pencils as arrows
Free 3D model of a pencil holder
Another view of a 3D printed pencil holder shaped as a man with a shield and pencils as arrows

Free 3D model of pen holder for 3D printing
Assembly of the pen holder

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

High.

Printing speed

High printing speed but low speed for the last layers of the parts that contain probes for the assembly.

Travel speed

High.

Download Design: Link
(1x) Wood filament


RECENT POSTS