Are you afraid that someone can watch you from your camera? Instead of using tape all the time, you can print this clip to protect your privacy. A minimalism way to cover your web camera of your laptop, desktop pc or your tablet. Using a thin double sided tape, the clip can be removed at any time and also does not prevent laptops from closing. Just download the model and save money from buying a similar product…
Supports or rafts
This part does not need supports or rafts.
Use of one perimeter line.
Low, e.g. for 0.4 mm nozzle, it is recommended the use 0.1 mm layer height.
3D model of universal laptop cooler with stand for 3D printing
Instead of buying cheap or expensive laptop coolers that you are not sure if they match with your laptop, you can 3D print and build our propose gadget of a universal cooling pad extracting the hot air from your laptop. The mini vacuum made by three fans of 25X25X10mm size extracting the hot air directly from your laptops’ GPU and CPU. Also, the stand is made at an angle of 15 degrees reducing the temperature by just letting the hot air under your laptop to be recycled. Despite the ergonomic stand, the proposed cooler is much smaller than the common commercial vacuum USB coolers and more effective.
The assembly of the laptop cooler is very easy. Just 3D print the models that you can find at the end of the post with the suggested printing settings. Also, if you deal any trouble with the cup of the fans, a scaled part at 99% is included. Use of 2.5mm or 3mm bolts with 15mm length. In the above photo, 2.5mm bolts have been used. Find a USB cable, even an old one, cut it at the right size and find the red and black cables. Make a simple connection of all the red cables and all the black cables respectively and you are ready. Don’t forget to make a knob or just use a plastic strap to secure the cable not to go off. The only disadvantage of this proposed 3D printed product is that it makes noise due to the low-cost fans. However, it can be used in conjunction with our proposed design product laptop stand. Don’t let your laptop burning when it handles heavy computational lifts!
A 3D model of a laptop stand with 15 degrees angle. A simple and a elegant design that helps for the reduction of your laptop’s temperature with an ergonomic style. It has been printed with carbon filament. Each part needs one hour to be printed approximately with no supports and any special print setting. The best thing is that can be combined with our universal laptop cooler!
A smart design of a screen holder preventing a laptop from closing. It is very helpful when the laptop is connected to a TV or an external monitor. The hole in the part allows the connection of an USB cable, i.e. an external keyboard.
A 3D model of a small mushroom as a USB lighter for the desk. The head of the mushroom has been 3D printed with glow in the dark filament, saving the light energy and continue glowing and after the switching-off.
The only thing that you have to do is to find an old USB cable, cut it and find the red and the black cables. You can use a simple LED just connecting the positive with the red and the negative with the black. A low resistor could be needed so not to burn out the LED. But generally, it is a very simple procedure.
Supports or rafts
This part does not need supports or rafts. The last layers of the object have been designed as a bridge and not as a dome. Also, the bridge is inside and therefore there is no point to waste material.
Use of three lines perimeter.
Low layer height, i.e. 0.1 mm. It affects mostly the last layers, which is the bottom of the model. A higher layer can be used, but it will not make a nice bottom surface (or top during 3D printing). However, because the object is placed upside down, you will not be able to notice this detail.
High printing speed, with low to medium gap speed. However, the high speed can create perpendicular stripes on the object due to the vibrations.