Mushroom USB LED light

Mushroom USB LED light

Electronics, Gadgets, Laptop

3D model of a mushroom lighter

A 3D model of a small mushroom as a USB lighter for the desk. The head of the mushroom has been 3D printed with glow in the dark filament, saving the light energy and continue glowing and after the switching-off.

Free 3D model of a mushroom lighter for 3D printing
3D model of a mushroom lighter for 3D printing

The only thing that you have to do is to find an old USB cable, cut it and find the red and the black cables. You can use a simple LED just connecting the positive with the red and the negative with the black. A low resistor could be needed so not to burn out the LED. But generally, it is a very simple procedure.

Free 3D model of a mushroom lighter for 3D printing
3D model of a mushroom lighter for 3D printing
Free 3D model of a mushroom lighter for 3D printing
Rendered 3D model of a mushroom lighter for 3D printing


THE HEAD

Supports or rafts

This part does not need supports or rafts. The last layers of the object have been designed as a bridge and not as a dome. Also, the bridge is inside and therefore there is no point to waste material.

Perimeters

Use of three lines perimeter.

Layer Height

Low layer height, i.e. 0.1 mm. It affects mostly the last layers, which is the bottom of the model. A higher layer can be used, but it will not make a nice bottom surface (or top during 3D printing). However, because the object is placed upside down, you will not be able to notice this detail.

Printing speed

High printing speed, with low to medium gap speed. However, the high speed can create perpendicular stripes on the object due to the vibrations.

Travel speed

High.

 

THE BODY

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

High.

Printing speed

High.

Travel speed

High.

 

 

DOWNLOAD DESIGN: LINK
(1X) SMALL LED
(1X) SIMPLE USB CABLE
(1X) GLOW IN THE DARK FILAMENT


RECENT POSTS
Laptop stand

Laptop stand

Desk, Gadgets, Home/Office, Laptop

3D model of a laptop stand for 3D printing

A 3D model of a laptop stand with 15 degrees angle. A simple and a elegant design that helps for the reduction of your laptop’s temperature with an ergonomic style.  It has been printed with carbon filament. Each part needs one hour to be printed approximately with no supports and any special print setting. The best thing is that can be combined with our universal laptop cooler!

Free 3D model of a laptop stand for 3D printing
3D model of a laptop stand for 3D printing
Free 3D model of a laptop stand for 3D printing
3D model of a laptop stand for 3D printing

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

High.

Printing speed

High.

Travel speed

High.

DOWNLOAD DESIGN: LINK
(1X) CARBON FILAMENT OR (1X) PLA FILAMENT


RECENT POSTS
Earphones holder

Earphones holder

Gadgets, Other wearables, Smartphone, Wearable/Fashion

3D model of an earphones holder for 3D printing

Make a smart earphones holder by 3D printing our proposed model. Print the clips and use a piece of a flexible filament to hold your earbuds around your neck all the time.

Free 3D model of an earphones holder
3D printed earphones holder

Cut a piece of a flexible filament at the right size, pass it through the hole and make a knob. You can also burn it a little bit with a lighter.

Free 3D model of an earphones holder
Use a piece of a flexible filament for the earphones holder

Free 3D model of an earphones holder
3D printed earphones holder

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of one perimeter line.

Layer Height

Low.

Printing speed

Low.

Travel speed

High.

DOWNLOAD DESIGN: LINK
(1X) PLA FILAMENT
(1X) FLEXIBLE FILAMENT


RECENT POSTS
Universal laptop cooler with stand

Universal laptop cooler with stand

Electronics, Favourite projects, Gadgets, Laptop

3D model of universal laptop cooler with stand for 3D printing

Instead of buying cheap or expensive laptop coolers that you are not sure if they match with your laptop, you can 3D print and build our propose gadget of a universal cooling pad extracting the hot air from your laptop. The mini vacuum made by three fans of 25X25X10mm size extracting the hot air directly from your laptops’ GPU and CPU. Also, the stand is made at an angle of 15 degrees reducing the temperature by just letting the hot air under your laptop to be recycled. Despite the ergonomic stand, the proposed cooler is much smaller than the common commercial vacuum USB coolers and more effective.

Free 3D model of a universal laptop cooler with stand
3D printed universal laptop cooler with stand

The assembly of the laptop cooler is very easy. Just 3D print the models that you can find at the end of the post with the suggested printing settings. Also, if you deal any trouble with the cup of the fans, a scaled part at 99% is included. Use of 2.5mm or 3mm bolts with 15mm length. In the above photo, 2.5mm bolts have been used. Find a USB cable, even an old one, cut it at the right size and find the red and black cables. Make a simple connection of all the red cables and all the black cables respectively and you are ready. Don’t forget to make a knob or just use a plastic strap to secure the cable not to go off. The only disadvantage of this proposed 3D printed product is that it makes noise due to the low-cost fans. However, it can be used in conjunction with our proposed design product laptop stand. Don’t let your laptop burning when it handles heavy computational lifts!

Free 3D model of a universal laptop cooler with stand
The connection of the universal laptop cooler.

FOR aLL PARTS

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

High.

Printing speed

High.

Travel speed

High.

DOWNLOAD DESIGN: LINK
(1X) PLA FILAMENT
(1X) SIMPLE USB CABLE
(3X) 25x25x10 mm Fan 5V
(12X) BOLTS 3MMX15MM or 2.5MMX15MM
(12X) NUTS 3MM (OPTIONAL)


RECENT POSTS
Laptop screen holder

Laptop screen holder

Gadgets, Laptop

3D model of a laptop screen holder

A smart design of a screen holder preventing a laptop from closing. It is very helpful when the laptop is connected to a TV or an external monitor. The hole in the part allows the connection of an USB cable, i.e. an external keyboard.

Free 3D model of a laptop screen holder
3D printed laptop screen holder

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

High.

Printing speed

Medium with low bridge printing speed.

Travel speed

High.

DOWNLOAD DESIGN: LINK
(1X) PLA FILAMENT


RECENT POSTS
Web camera cover

Web camera cover

Camera, Favourite projects, Laptop

3D model of a camera clip

Are you afraid that someone can watch you from your camera? Instead of using tape all the time, you can print this clip to protect your privacy. A minimalism way to cover your web camera of your laptop, desktop pc or your tablet. Using a thin double sided tape, the clip can be removed at any time and also does not prevent laptops from closing. Just download the model and save money from buying a similar product…

Free 3D model of a web camera cover
3D printed web camera cover

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of one perimeter line.

Layer Height

Low, e.g. for 0.4 mm nozzle, it is recommended the use 0.1 mm layer height.

Printing speed

Low.

Travel speed

Low.

DOWNLOAD DESIGN: LINK
(1X) PLA FILAMENT
(1X) THIN DOUBLE SIDED TAPE


RECENT POSTS
Smartphone gaming grip with screen magnifier

Smartphone gaming grip with screen magnifier

Favourite projects, Gadgets, Popular posts, Smartphone

3D model of a universal gaming controller for smartphones with screen magnifier

This is the updated version of our smartphone gaming controller with a screen magnifier for the best gaming experience. Download for free an adjustable gaming grip for smartphones or light consoles with nice fitting and ergonomic design as it was the previous model but now live the gaming experience magnified. This game controller was printed with a carbon filament and can be adjusted in various smartphones; up to 5-6 inches smartphone. The previous version can fit larger smartphone downloading and printing the ‘long holder’ and using longer springs. If you have printed the previous version, the only thing that you need to print is the left and right part 3.

Free 3D model of gaming pad with screen magnifier
Rendered view of a gaming pad 3D model with screen magnifier holder

 

Free 3D model of gaming pad with screen magnifier
Front view of the 3D printed gaming pad with screen magnifier

Use of a spring or even a simple rubber.

Back view of the 3D printed gaming pad


Handle Left/Right Part 1

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

Medium. Lower layer height makes smoother surfaces.

Printing speed

High printing speed with low printing for the last layers.

Travel speed

High.

Handle Left/Right Part 2

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

Medium. Lower layer height makes smoother surfaces.

Printing speed

High.

Travel speed

High.

 


Handle Left/Right Part 3

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

Medium. Lower layer height makes smoother surfaces.

Printing speed

High.

Travel speed

High.

Holder

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

High.

Printing speed

Medium printing speed. At the last layers probably there is a need for lower speed because the part can be detached from the vibrations.

Travel speed

Medium travel speed, because the extruder nozzle can unstack the part.

DOWNLOAD DESIGN: LINK
COMPONENTS:
(1X) MAGNIFIER SHEET 180X120 (MM)
(7X) BOLTS 3MMX10MM
(1X) NUTS 3MM
(2X) SPRINGS OR SIMPLE RUBBERS
(1X) CARBON FILAMENT


RECENT POSTS
Smartphone gaming grip

Smartphone gaming grip

Gadgets, Smartphone

3D model of a universal gaming controller for smartphones

Download for free an adjustable gaming grip for smartphones or light consoles with nice fitting and ergonomic design. This game controller was printed with a carbon filament and can be adjusted in various smartphones. All the parts can be 3D printed with no supports and seven screws are enough for the assembly. At the figures, the smartphone’s size is at 5 inches but also a longer holder is included for iPhones and Galaxy smartphones.

Smartphone gaming controller (grip)
3D model of a smartphone gaming pad for 3D printing

Smartphone gaming grip
Front view of the 3D printed smartphone gaming controller.

Use of a spring or even a simple rubber.

Back view of the 3D printed gaming pad
Free 3D model of a smartphone gaming grip for 3D printing
A smartphone gaming controller with ergonomic design


Handle Left/Right Part 1

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

Medium. Lower layer height makes smoother surfaces.

Printing speed

High printing speed with low printing for the last layers.

Travel speed

High.

Handle Left/Right Part 2

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

Medium. Lower layer height makes smoother surfaces.

Printing speed

High.

Travel speed

High.

 

Holder

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

High.

Printing speed

Medium printing speed. At the last layers probably there is a need for lower speed because the part can be detached from the vibrations.

Travel speed

Medium travel speed, because the extruder nozzle can unstack the part.

You can download an extension here. Use of a magnifier of a better gaming experience.

Free 3D model of gaming pad with screen magnifier
Rendered view of a gaming pad 3D model with screen magnifier holder
Free 3D model of gaming pad with screen magnifier
Front view of the 3D printed gaming pad with screen magnifier

 

DOWNLOAD DESIGN: LINK
COMPONENTS:
(7x) BOLTS 3MMX10MM
(1x) NUTS 3MM
(2x) SPRINGS oR SIMPLE RUBBERS
(1x) CARBON FILAMENT


RECENT POSTS

 

Arduino Uno case

Arduino Uno case

Electronics, Gadgets

3D model of an Arduino case

Sometimes you want to have your Arduino protected but also an easy access. This case fits Arduino Uno and has an easy open/close cap.

3D model of an Arduino Uno case for 3D printing
3D printed Arduino Uno case with an easy open/close clap

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of  three lines perimeter.

Layer Height

High.

Printing speed

High printing speed but low bridge speed.

Travel speed

High.

Download Design: Link
(1x) PLA filament


RECENT POSTS

 

E-cigarette case and air ring

E-cigarette case and air ring

Gadgets, Other wearables, Wearable/Fashion

3D models of an e-cigarette case and an air ring for 3D printing

This type of e-cigarettes can fall down and break very easily. Therefore, we designed this 3D printed e-cigarette case with a place for a small 10ml e-smoking liquid bottle. You can find the design with different diameters between 25mm to 20mm. Also, there is two e-cigarette case type: small and large which have been 3D printed with a carbon filament.

Free 3D model of an e-cigarette case for 3D printing
3D printed e-cigarette case with a place for a small 10ml e-smoking liquid bottle and a 3D printed air ring

For the case

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

Hight layer height for less printing time.

Printing speed

High printing speed, but low speed only for the last layers. Tthe clip which is at the higher point of the object should be printed rigid.

Travel speed

High.

For the air ring

Supports or rafts

If you use very low bridge speed, there is no need for supports or rafts (this is how we printed). However, the use of supports could be a better solution.

Perimeters

Use of three lines perimeter.

Layer Height

Hight layer height for less printing time.

Printing speed

High printing speed with very low bridge speed. It is very important to keep this speed extremely low, so to create the gap for the air accurately. However, if supports will be used there is no need for low bridge speed.

Travel speed

High.

Download Design: Link
(1x) PLA filament
(1x) Carbon filament


RECENT POSTS