Web camera cover

Web camera cover

Camera, Favourite projects, Laptop

3D model of a camera clip

Are you afraid that someone can watch you from your camera? Instead of using tape all the time, you can print this clip to protect your privacy. A minimalism way to cover your web camera of your laptop, desktop pc or your tablet. Using a thin double sided tape, the clip can be removed at any time and also does not prevent laptops from closing. Just download the model and save money from buying a similar product…

Free 3D model of a web camera cover
3D printed web camera cover

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of one perimeter line.

Layer Height

Low, e.g. for 0.4 mm nozzle, it is recommended the use 0.1 mm layer height.

Printing speed

Low.

Travel speed

Low.

DOWNLOAD DESIGN: LINK
(1X) PLA FILAMENT
(1X) THIN DOUBLE SIDED TAPE


RECENT POSTS
Universal laptop cooler with stand

Universal laptop cooler with stand

Electronics, Favourite projects, Gadgets, Laptop

3D model of universal laptop cooler with stand for 3D printing

Instead of buying cheap or expensive laptop coolers that you are not sure if they match with your laptop, you can 3D print and build our propose gadget of a universal cooling pad extracting the hot air from your laptop. The mini vacuum made by three fans of 25X25X10mm size extracting the hot air directly from your laptops’ GPU and CPU. Also, the stand is made at an angle of 15 degrees reducing the temperature by just letting the hot air under your laptop to be recycled. Despite the ergonomic stand, the proposed cooler is much smaller than the common commercial vacuum USB coolers and more effective.

Free 3D model of a universal laptop cooler with stand
3D printed universal laptop cooler with stand

The assembly of the laptop cooler is very easy. Just 3D print the models that you can find at the end of the post with the suggested printing settings. Also, if you deal any trouble with the cup of the fans, a scaled part at 99% is included. Use of 2.5mm or 3mm bolts with 15mm length. In the above photo, 2.5mm bolts have been used. Find a USB cable, even an old one, cut it at the right size and find the red and black cables. Make a simple connection of all the red cables and all the black cables respectively and you are ready. Don’t forget to make a knob or just use a plastic strap to secure the cable not to go off. The only disadvantage of this proposed 3D printed product is that it makes noise due to the low-cost fans. However, it can be used in conjunction with our proposed design product laptop stand. Don’t let your laptop burning when it handles heavy computational lifts!

Free 3D model of a universal laptop cooler with stand
The connection of the universal laptop cooler.

FOR aLL PARTS

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

High.

Printing speed

High.

Travel speed

High.

DOWNLOAD DESIGN: LINK
(1X) PLA FILAMENT
(1X) SIMPLE USB CABLE
(3X) 25x25x10 mm Fan 5V
(12X) BOLTS 3MMX15MM or 2.5MMX15MM
(12X) NUTS 3MM (OPTIONAL)


RECENT POSTS
Earphones holder

Earphones holder

Gadgets, Other wearables, Smartphone, Wearable/Fashion

3D model of an earphones holder for 3D printing

Make a smart earphones holder by 3D printing our proposed model. Print the clips and use a piece of a flexible filament to hold your earbuds around your neck all the time.

Free 3D model of an earphones holder
3D printed earphones holder

Cut a piece of a flexible filament at the right size, pass it through the hole and make a knob. You can also burn it a little bit with a lighter.

Free 3D model of an earphones holder
Use a piece of a flexible filament for the earphones holder

Free 3D model of an earphones holder
3D printed earphones holder

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of one perimeter line.

Layer Height

Low.

Printing speed

Low.

Travel speed

High.

DOWNLOAD DESIGN: LINK
(1X) PLA FILAMENT
(1X) FLEXIBLE FILAMENT


RECENT POSTS
Laptop stand

Laptop stand

Desk, Gadgets, Home/Office, Laptop

3D model of a laptop stand for 3D printing

A 3D model of a laptop stand with 15 degrees angle. A simple and a elegant design that helps for the reduction of your laptop’s temperature with an ergonomic style.  It has been printed with carbon filament. Each part needs one hour to be printed approximately with no supports and any special print setting. The best thing is that can be combined with our universal laptop cooler!

Free 3D model of a laptop stand for 3D printing
3D model of a laptop stand for 3D printing
Free 3D model of a laptop stand for 3D printing
3D model of a laptop stand for 3D printing

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

High.

Printing speed

High.

Travel speed

High.

DOWNLOAD DESIGN: LINK
(1X) CARBON FILAMENT OR (1X) PLA FILAMENT


RECENT POSTS
Laptop screen holder

Laptop screen holder

Gadgets, Laptop

3D model of a laptop screen holder

A smart design of a screen holder preventing a laptop from closing. It is very helpful when the laptop is connected to a TV or an external monitor. The hole in the part allows the connection of an USB cable, i.e. an external keyboard.

Free 3D model of a laptop screen holder
3D printed laptop screen holder

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

High.

Printing speed

Medium with low bridge printing speed.

Travel speed

High.

DOWNLOAD DESIGN: LINK
(1X) PLA FILAMENT


RECENT POSTS
Pyramid soap dish/holder

Pyramid soap dish/holder

Home/Office, Household

3D model of a soap dish for 3D printing

A 3D model of a soap holder in the shape of pyramids. A cool design that can keep the soap dry holding the water inside. The soap dries very fast due to the tips of the pyramids. It works really great!

 Free 3D model of a soap dish for 3D printing
3D model of a soap dish for 3D printing
Free 3D model of a soap dish for 3D printing
Rendered 3D model of a soap dish for 3D printing

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

Low.

Printing speed

Medium.

Travel speed

High.

DOWNLOAD DESIGN: LINK
 (1X) PLA FILAMENT


RECENT POSTS
Hanger

Hanger

Exclusively, Home/Office, Household

3D model of a laptop stand for 3D printing

A 3D model of a simple but ergonomic hanger. The angles and the length of the probes have been measured for the maximum convenience. A cool design that can be 3D printed and be placed on doors or walls. It is recommended to be printed with 100% infill density, so can handle without problem a lot of clothes. Also, it could be 3D printed with carbon filament for higher endurance.

Free 3D model of a hanger for 3D printing
3D model of a hanger for 3D printing
Free 3D model of a hanger for 3D printing
Rendered 3D model of a hanger for 3D printing

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

High.

Printing speed

High.

Travel speed

High.

DOWNLOAD DESIGN: LINK
(1X) CARBON FILAMENT OR (1X) PLA FILAMENT


RECENT POSTS
Hot chocolate / Coffee stencil – Wonder Woman

Hot chocolate / Coffee stencil – Wonder Woman

Chocolate/Coffee stencils, Exclusively, Home/Office

3D model of a unique hot chocolate – coffee stencil for 3D printing

The design represents the symbol of Wonder Woman. The stencil can be printed with PLA filament, which has been recognized as safe if it will be used in contact with food. The diameter of the coffee stencil is 8 cm. Make a cool custom design with chocolate powder on your cappuccino or chocolate by using our unique stencils. Surprise your customers, your family or your kids by making special hot drinks with your personal taste. There is no need for buying these, just download the model and print it on your own 3D printer.

Free hot chocolate - coffee stencil 3D models
Hot chocolate/coffee stencil for 3D printing with the symbol of Wonder Woman

You can download the same model with a ring holder.

Free hot chocolate - coffee stencil 3D models
Hot chocolate/coffee stencil for 3D printing with the symbol of Wonder Woman – Back view with ring holder

The coffee stencils can be used also on lattes, biscuits, pastries, cakes, desserts and cocktails. You can find a variety of unique stencils here representing icons for every mood and popular figures such as Stormtrooper, Death Star, minions, unicorn and much more.

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

High layer height, i.e. 0.25 mm for a 3D printer with 0.4 mm nozzle, since it does not affect any detail of the part.

Printing speed

Medium printing speed for perimeter lines and high speed for infill.

Travel speed

High.

DOWNLOAD DESIGN: LINK
DOWNLOAD DESIGN WITHOUT RING HOLDER: LINK
(1X) PLA FILAMENT


RECENT POSTS
Hot chocolate / Coffee stencil – Transformers Decepticons

Hot chocolate / Coffee stencil – Transformers Decepticons

Chocolate/Coffee stencils, Exclusively, Home/Office

3D model of a unique hot chocolate – coffee stencil for 3D printing

The design represents the symbol of Decepticons from Transformers. The stencil can be printed with PLA filament, which has been recognized as safe if it will be used in contact with food. The diameter of the coffee stencil is 8 cm. Make a cool custom design with chocolate powder on your cappuccino or chocolate by using our unique stencils. Surprise your customers, your family or your kids by making special hot drinks with your personal taste. There is no need for buying these, just download the model and print it on your own 3D printer.

Free hot chocolate - coffee stencil 3D models
Hot chocolate/coffee stencil for 3D printing with the symbol of Decepticons from Transformers

You can download the same model with a ring holder.

 Free hot chocolate - coffee stencil 3D models
Hot chocolate/coffee stencil for 3D printing with the symbol of Decepticons from Transformers – Back view with ring holder

The coffee stencils can be used also on lattes, biscuits, pastries, cakes, desserts and cocktails. You can find a variety of unique stencils here representing icons for every mood and popular figures such as Stormtrooper, Death Star, minions, unicorn and much more.

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

High layer height, i.e. 0.25 mm for a 3D printer with 0.4 mm nozzle, since it does not affect any detail of the part.

Printing speed

Medium printing speed for perimeter lines and high speed for infill.

Travel speed

High.

DOWNLOAD DESIGN: LINK
DOWNLOAD DESIGN WITHOUT RING HOLDER: LINK
(1X) PLA FILAMENT


RECENT POSTS
Hot chocolate / Coffee stencil – Transformers Autobots

Hot chocolate / Coffee stencil – Transformers Autobots

Chocolate/Coffee stencils, Exclusively, Home/Office

3D model of a unique hot chocolate – coffee stencil for 3D printing

The design represents the symbol of Autobots from Transformers. The stencil can be printed with PLA filament, which has been recognized as safe if it will be used in contact with food. The diameter of the coffee stencil is 8 cm. Make a cool custom design with chocolate powder on your cappuccino or chocolate by using our unique stencils. Surprise your customers, your family or your kids by making special hot drinks with your personal taste. There is no need for buying these, just download the model and print it on your own 3D printer.

Free hot chocolate - coffee stencil 3D models
Hot chocolate/coffee stencil for 3D printing with the symbol of Autobots from Transformers

You can download the same model with a ring holder.

 Free hot chocolate - coffee stencil 3D models
Hot chocolate/coffee stencil for 3D printing with the symbol of Autobots from Transformers – Back view with ring holder

The coffee stencils can be used also on lattes, biscuits, pastries, cakes, desserts and cocktails. You can find a variety of unique stencils here representing icons for every mood and popular figures such as Stormtrooper, Death Star, minions, unicorn and much more.

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

High layer height, i.e. 0.25 mm for a 3D printer with 0.4 mm nozzle, since it does not affect any detail of the part.

Printing speed

Medium printing speed for perimeter lines and high speed for infill.

Travel speed

High.

DOWNLOAD DESIGN: LINK
DOWNLOAD DESIGN WITHOUT RING HOLDER: LINK
(1X) PLA FILAMENT


RECENT POSTS