3D models of an e-cigarette case and an air ring for 3D printing

This type of e-cigarettes can fall down and break very easily. Therefore, we designed this 3D printed e-cigarette case with a place for a small 10ml e-smoking liquid bottle. You can find the design with different diameters between 25mm to 20mm. Also, there is two e-cigarette case type: small and large which have been 3D printed with a carbon filament.

Free 3D model of an e-cigarette case for 3D printing
3D printed e-cigarette case with a place for a small 10ml e-smoking liquid bottle and a 3D printed air ring

For the case

Supports or rafts

This part does not need supports or rafts.

Perimeters

Use of three lines perimeter.

Layer Height

Hight layer height for less printing time.

Printing speed

High printing speed, but low speed only for the last layers. Tthe clip which is at the higher point of the object should be printed rigid.

Travel speed

High.

For the air ring

Supports or rafts

If you use very low bridge speed, there is no need for supports or rafts (this is how we printed). However, the use of supports could be a better solution.

Perimeters

Use of three lines perimeter.

Layer Height

Hight layer height for less printing time.

Printing speed

High printing speed with very low bridge speed. It is very important to keep this speed extremely low, so to create the gap for the air accurately. However, if supports will be used there is no need for low bridge speed.

Travel speed

High.

Download Design: Link
(1x) PLA filament
(1x) Carbon filament


RECENT POSTS